The armrest of the handicapped in Chongqing anti-collision handrails should be used in ABS plastics

The armrest of the disabled handrails of Chongqing should be ABS plastic first, and the surface should have anti slip plastic rubber particles.

Secondly, the qualified handrail for disabled persons should be made of NBS plastic, NBS as environmental protection material, and NBS to inhibit bacterial growth, which is a material with antibacterial function.

Third, the wall thickness of the stainless steel tube is more than 2mm, and the vertical pressure does not produce the bending.

At present, the main characteristics of unqualified products on the market are as follows:

1. stainless steel tube surface is too smooth, easy to slide hand, not conducive to the handicapped grasp.

Armrest of Chongqing

2. galvanized pipes are easy to rust after a period of use.

3. galvanized pipe and stainless steel tube in low temperature, especially in winter, it feels too cold in hand.

4. the coating of galvanized pipe with ABS plastic is a little better than the direct use of stainless steel tube and galvanized pipe, but it is easy to hide bacteria, especially in hospital.

5. the galvanized pipe is wrapped with NBS, and it will also rust in the position of the joint in the future.

6. the armrest of the disabled is not enough, and the force will bend under the condition of force.

The hospital of the anti-collision handrail installation: 5 m, sent to the scene cut, while installing a bend, usually let the customer count should be cut into many pieces, and determined to set the number of elbows, the base is a set of 70mm distribution (including a 1 base and 1 pull explosion gong wire), Ann loading all the size, length of collocation, this loss is not so large, then cut aluminum, punching walls, holes in the aluminum, the elbow adopts a screw lock in the aluminum panel above, and then put into the corresponding length of buckle up on it.