Main characteristics of special anticollision protection materials in hospital

1) the entry area of large and medium-sized public buildings should be kept within 2.00m X 2.00m wheelchair area. The small and medium-sized public buildings should have no less than 1.50M X 1.50M roundabout area.

2) building a safe entrance Pavilion, or with two doors in the hall, the hall, in the two open door leaf spacing should not be less than 1.20m.

3) the door for the disabled to be used first, the automatic door and the push and pull door should be adopted, and the next is to open the door. Revolving doors and large spring doors should not be used.

4) the effective net width of the wheelchair through the automatic door should not be less than 1.00m, and the effective net width of the push and pull door and the flat door should not be less than 0.80M.

5) when the wheelchair person opens the push or pull door or the open door, the wall face on the side of the door handle should be left with the width of the wall not less than 0.50m.

6) the door fan that is opened in the wheelchair should be installed to observe the glass and the horizontal handle and the door of the door. The high 0.35m door panel should be installed below the door fan.

7) the net width of a large and medium-sized public building through a wheelchair should not be less than 1.50M. The net width of a small public building should not be less than 1.20m, and the back area of the 1.50M X1.50m wheelchair should be set at the end of the aisle.

8) the ground of the aisle should be flat, unsmooth, no water and no obstacles. When there is a step in the aisle, a ramp which is in line with a wheelchair should be set.

9) as the gate to open the aisle should be set up in the alcove, a depth of not less than 0.90M, width of not less than 1.30m.

10) on the two sides of the walkways of buildings, traffic buildings and medical buildings. A high 0.85m armrest should be set up.

11) mainly provide the aisle for the disabled and the elderly

The width of the A walkway should not be less than 1.80m.

A high 0.85m armrest must be set on both sides of the B walkway.

The ground of the C aisle must be smooth and use skidproof and not slippery ground.

Material Science。

D in the lower part of the wall on both sides of the aisle, a high 0.35m wall panel should be set.

The sun angle at the E aisle turn should be designed as a circular or 45 degree angle wall.

F in the aisle side of the ground, should set the width of 0.40m to 0.60m of the blind, blind

The inner side is 0.30m from the wall.

No obstacles should be set in the G walkway, and the illuminance of the aisle should reach 200LX.

Special anticollision protective materials for hospital

Main features:

The wall, solid and reliable, beautiful and practical

And the anticollision handrail, wall plate plays a beautiful and uniform effect

The installation easy maintenance and durable

The color type variety, can meet the needs of different styles of environment

The antibacterial, flame retardant, easy to clean

Performance characteristics:

Wall corner buffer effect: installation in the wall corner protection can buffer a variety of cart, object impact, can prevent wall damage and body negative injury

Outstanding decoration effect: a variety of colors can be selected according to the space environment, and the interior decoration effect is good

Economy: assembled design and construction, can be partially replaced when damaged

In bacteria: exterior materials PVC/ABS special antibacterial treatment, can prevent the spread of germs